烧结烟气脱硫脱硝用活性炭混合钢渣复合材料的光谱学分析

钢渣是冶金工业中产生的主要固体废弃物,其产量约为每年粗钢产量的15%~20%。由于技术的局限,导致我国钢渣利用率较低,仅为年钢渣产量的10%,同时加之管理制度的不健全,导致钢渣大量露天堆放,对土地资源、地下水源,以及空气质量形成严重影响。固体废弃物再利用是资源可持续发展的重要途径之一,钢渣的主要化学成分为CaO, SiO2, Al2O3, MgO, Fe2O3, MnO, f-CaO等。面对上述问题,利用冶金固体废弃物与活性炭开发一种价格低廉且性能优越的活性炭混合钢渣复合材料,既是冶金固体废弃物的高附加值利用与资源可持续发展的重要途径之一,也是大幅降低改性活性炭生产成本与提高经济效益的重要途径之一。该研究创新性以活性炭与钢渣为研究对象,利用钢渣中含有的金属氧化物对活性炭进行改性处理制备用于烧结烟气脱硫脱硝的活性炭混合钢渣复合材料,通过搭建实验反应装置对活性炭混合钢渣复合材料的脱硫脱硝性能进行测试。利用X射线荧光光谱仪(XRF)对钢渣的化学成分进行测试与分析,比表面积及孔径测定仪(BET)对活性炭混合钢渣复合材料的孔结构进行测试与分析,傅里叶变换红外光谱仪(FTIR)对钢渣的结构组成进行测试与分析,扫描电子显微镜(SEM)对活性炭混合钢渣复合材料的微观结构进行测试与分析,以揭示活性炭与钢渣制备活性炭混合钢渣复合材料的机理,以及活性炭混合钢渣复合材料对烧结烟气脱硫脱硝的机理。结果表明:当钢渣为电炉热泼渣、钢渣与活性炭质量比为2∶4、钢渣与活性炭细度为400目时,活性炭混合钢渣复合材料具有良好的脱硫脱硝性能与合理的经济性,即脱硫效率为100%、脱硝效率为58%。活性炭混合钢渣复合材料具有的多孔结构对SO2和NO进行有作用,钢渣中Fe2O3与MnO2促使活性炭官能团进行催化还原反应提高脱硫脱硝性能,其中吸附作用是主导与前提,催化还原反应是辅助与协同。以期为高附加值的钢渣利用提供新途径,实现钢铁企业以废治废、以废增效的目的。     

Aggregation‐Induced and Polymorphism‐Dependent Thermally Activated Delayed Fluorescence (TADF) Characteristics of an Oligothiophene: Applications in Time‐Dependent Live Cell Multicolour Imaging

Typically, molecules with a twisted donor–acceptor (D‐A) architecture have been exploited for constructing thermally activated delayed fluorescence (TADF) materials. Herein, we report the first example of a thiophene‐based thermally activated delayed fluorescent molecule without a D‐A architecture. Compound 1 (2,5‐bis(2,2‐di(thiophen‐2‐yl)vinyl)thiophene) is conformationally flexible and shows weak fluorescence in the solution state but displays bright TADFin both condensed and solid states. Compound 1 crystallized in two different polymorphs ( 1 a and 1 b ). Interestingly, both polymorphs show distinctly different TADF features. The broad spectral features and the TADF characteristics of 1 have been explored for the time‐dependent multicolor (green, yellow and red) imaging of living cells.     

Evaluation of an activated carbon from olive stones used as an adsorbent for heavy metal removal from aqueous phases

The performance of a microporous activated carbon prepared chemically from olive stones for removing Cu(II), Cd(II) and Pb(II) from single and binary aqueous solutions was investigated via the batch technique. The activated carbon sample was characterized using N₂ adsorption–desorption isotherms, SEM, XRD, FTIR, and Boehm titration. The effect of initial pH and contact time were studied. Adsorption kinetic rates were found to be fast and kinetic experimental data fitted very well the pseudo-second-order equation. The adsorption isotherms fit the Redlich–Peterson model very well and maximum adsorption amounts of single metal ions solutions follow the trend Pb(II) > Cd(II) > Cu(II). The adsorption behavior of binary solution systems shows a relatively high affinity to Cu(II) at the activated carbon surface of the mixture with Cd(II) or Pb(II). An antagonistic competitive adsorption phenomenon was observed. Desorption experiments indicated that about 59.5% of Cu(II) and 23% of Cd(II) were desorbed using a diluted sulfuric acid solution.     

Theoretical Investigation of the Mechanism of Rh(III)-catalyzed Annulation of 2-Biphenylboronic Acid with Activated Alkene

The mechanism is investigated for Cp^tBuRh(OH)₂-catalyzed annulation of 2-biphenylboronic acid with three activated alkenes using M06-2X functional. The reaction comprises transmetalation via two steps and following C-H activation producing reactive Rh-biphenyl complex with two Rh—C σ bonds. After the coordination/insertion of alkenes, respective fused or bridged cyclic products are yielded depending on different alkenes accompanied by the release of Cp^tBuRh. The promotion of Cp^tBuRh(OH)₂ lies in the barrier decrease of transmetalation and C-H activation ready for coordination/insertion ensuring the smooth progress of common rate-limiting reductive elimination. The stereoselective transfer and ring rotation are specific for benzoquinone and cyclopropenone. The role of Rh(III) catalyst and release of Rh(I) is supported by Multiwfn analysis on frontier molecular orbital(FMO) of specific transiton states(TSs) and Mayer bond order(MBO) value of vital bonding, breaking.     

Mechanistic insights into methylene blue removal via olive stone-activated carbon: A study on surface porosity and characterization

Global attention is increasingly focused on the adverse health and environmental impacts of textile dyes, marking the necessity for effective and sustainable dye remediation strategies in industrial wastewater. This study introduces a novel, eco-friendly activated carbon produced from olive stones (OLS), a readily available by-product of the olive oil industry. The OLS was chemically activated with H₃PO₄ and KOH, creating two materials: OLS-P and OLS-K, respectively. These were then utilized as cost-effective adsorbents for the removal of methylene blue (MB) dye. The activated materials were characterized via X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FTIR), iodine number, and pHpzc analysis, with the zero-point charge determined as approximately pH 1 for OLS-P and pH 8 for OLS-K. Batch adsorption experiments conducted at various temperatures revealed that adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm model. Temperature was found to significantly impact adsorption performance, with OLS-K demonstrating a substantial increase in adsorption capacity (q_e) from 6.27 mg/g at 23˚C to 94.7 mg/g at 32 ˚C. Conversely, OLS-P displayed a decrease in q_e from 16.78 mg/g at 23 ˚C to 3.67 mg/g at 32 ˚C as temperature increased. The study highlights the potential of KOH-treated olive stones as a promising, cost-efficient adsorbent for methylene blue remediation from wastewater.     

Boron-Dipyrromethene-Based Fluorescent Emitters Enable High-Performance Narrowband Red Organic Light-Emitting Diodes

Narrowband organic light-emitting diodes (OLEDs) are receiving significant attention and have demonstrated impressive performance in blue and green OLEDs. However, developing high-performance narrowband red OLEDs remains a highly desired yet challenging task. Herein, we have developed narrowband red fluorescent emitters by utilizing a boron-dipyrromethene (BODIPY) skeleton in combination with a methyl-shield strategy. These emitters exhibit small full-width at half-maxima (FWHM) ranging from 21 nm (0.068 eV) to 25 nm (0.081 eV) and high photoluminescence quantum yields (Φ_PL) ranging from 88.5 % to 99.0 % in toluene solution. Using BODIPY-based luminescent materials as emitters, high-performance narrowband red OLEDs have been assembled with external quantum efficiency as high as 18.3 % at 623 nm and 21.1 % at 604 nm. This work represents, to our knowledge, the first successful case of achieving NTSC pure-red OLEDs with the Commission Internationale de l’Éclairage (CIE) coordinates of [0.67, 0.33] based on conventional fluorescent emitters.     

Ultralow-loss Optical Waveguides through Balancing Deep-Blue TADF and Orange Room Temperature Phosphorescence in Hybrid Antimony Halide Microstructures

Harnessing the potential of thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) is crucial for developing light-emitting diodes (LEDs), lasers, sensors, and many others. However, effective strategies in this domain are still relatively scarce. This study presents a new approach to achieving highly efficient deep-blue TADF (with a PLQY of 25 %) and low-energy orange RTP (with a PLQY of 90 %) through the fabrication of lead-free hybrid halides. This new class of monomeric and dimeric 0D antimony halides can be facilely synthesized using a bottom-up solution process, requiring only a few seconds to minutes, which offer exceptional stability and nontoxicity. By leveraging the highly adaptable molecular arrangement and crystal packing modes, the hybrid antimony halides demonstrate the ability to self-assemble into regular 1D microrod and 2D microplate morphologies. This self-assembly is facilitated by multiple non-covalent interactions between the inorganic cores and organic shells. Notably, these microstructures exhibit outstanding polarized luminescence and function as low-dimensional optical waveguides with remarkably low optical-loss coefficients. Therefore, this work not only presents a pioneering demonstration of deep-blue TADF in hybrid antimony halides, but also introduces 1D and 2D micro/nanostructures that hold promising potential for applications in white LEDs and low-dimensional photonic systems.     

Anti-Stokes Luminescence in Multi-Resonance-Type Thermally-Activated Delayed Fluorescence Molecules

Photon-upconversion in organic molecular systems is one of the promising technologies for future energy harvesting systems because these systems can generate excitons that possess higher energy than excitation energy. The photon-upconversion caused by absorbing ambient heat as additional energy is particularly interesting because it could ideally provide a light-driving cooling system. However, only a few organic molecular systems have been reported. Here, we report the anti-Stokes photoluminescence (ASPL) derived from hot-band absorption in a series of multi-resonance-type thermally-activated delayed fluorescence (MR-TADF) molecules. The MR-TADF molecules exhibited an anti-Stokes shift of approximately 0.1 eV with a high PL quantum yield in the solution state. The anti-Stokes shift corresponded well to the 1–0 vibration transition from the ground state to the excited singlet state, and we further evaluated a correlation between the activation energy for the ASPL intensity and the TADF process. Our demonstration underlines that MR-TADF molecules have become a novel class of ASPL materials for various future applications, such as light-driving cooling systems.     

Diboraanthracene-Doped Polymer Systems for Colour-Tuneable Room-Temperature Organic Afterglow

Organic ultralong room temperature phosphorescence (RTP), or organic afterglow, is a unique phenomenon, gaining widespread attention due to its far-reaching application potential and fundamental interest. Here, two laterally expanded 9,10-dimesityl-dihydro-9,10-diboraanthracene (DBA) derivatives are demonstrated as excellent afterglow materials for red and blue-green light emission, which is traced back to persistent thermally activated delayed fluorescence and RTP. The lateral substitution of polycyclic DBA scaffold, together with weak transversal electron-donating mesityl groups, ensures the optimal molecular properties for (reverse) intersystem crossing and long-lived triplet states in a rigid poly(methyl methacrylate) matrix. The achieved afterglow emission quantum yields of up to 3 % and 15 %, afterglow lifetimes up to 0.8 s and 3.2 s and afterglow durations up to 5 s and 25 s (for red and blue-green emitters, respectively) are attributed to the properties of single molecules.     

Surface modification of date palm activated carbonaceous materials for heavy metal removal and CO2 adsorption

In this study, high surface area activated carbon (AC) was prepared from a local palm tree (Phoenix Dactylifera) using a variety of metal carbonates activators and finally achieved an excellent S_BET of 2700 m²/g when Cs₂CO₃ was used as an activating agent at a temperature of 600 °C. Surface modification of AC was carried out using various nitrogen transporting agents, resulting in N-doped ACs with nitrogen content varying from 4.0 to 11.4 %, depending on the functionalizing agents and activators used. The bimodal (presence of micro- as well as meso-porosity) ACs with such excellent surface properties were studied for their CO₂ uptake capacity at two different temperatures (0 and 25 °C) by isotherms recorded at pressure 1 bar and showed a remarkable uptake ability of 3.52 mmol/g (at 25 °C) and 5.6 mmol/g (at 0 °C), respectively. Also, batch experiments with variable pH, contact time, adsorbate concentrations, adsorbent dose, and temperatures were evaluated to understand the mechanism of sorption phenomena of Cr(VI) and Pb(II) achieving > 99.9 % removal capacity by the prepared ACs. Depending on the heavy metal ions being investigated, it was revealed that the pH of the solution and the amount of adsorbent had a direct impact on the total adsorption ability. Nitrogen atoms doped into the carbon frameworks were found to enhance the adsorption in the case of Pb(II) while the removal of Cr(VI) appeared to be unaffected. Maximum adsorption for Cr(VI) was observed at pH 2 and was determined to follow Freundlich isotherm while that of Pb(II) was observed at pH 7 and follows Langmuir isotherm. Best adsorption was found at an adsorbate concentration of 10 ppm and an adsorbent dose of 10 g/L. Kinetic modeling parameters showed the applicability of pseudo-second-order model perfectly.